Utilizarea nanomaterialelor și produselor nanometrice pentru tratarea apelor uzate(Use of nanomaterials and nanoscale products for wastewater treatment)

Procesele existente de apă și deșeuri Tratarea apei poate fi optimizat prin aplicații adecvate nanotehnologice, care poate duce la o îndepărtare mai bine direcționată a contaminanți, o mai bună eficiență energetică și costuri mai mici.
Experții prezic au, prin urmare, sectorul de apă ar putea beneficia cel mai mult de aplicații nanotehnologice inovatoare în termen mediu și lung

Posted: May 30, 2016

Use of nanomaterials and nanoscale products for wastewater treatment

(Nanowerk News) The German Environment Agency (UBA) has published the factsheet „Use of nanomaterials and nanoscale products for wastewater treatment” (pdf).

The treatment of contaminated water prior to its introduction into surface water is one of the most pressing global challenges of the future.
Existing processes for treating water and wastewater can be optimized by suitable nanotechnology applications, which can result in a more targeted removal of contaminants, better energy efficiency and lower costs.
Experts predict that the water sector could also benefit most from innovative nanotechnology applications in the medium to long term.
In addition to the benefits of using nanomaterials for water treatment, it should also be borne in mind that nanomaterials can have unintended impacts on the environment and human health.
When using nanomaterials it is important to note that the novel properties of nanomaterials may possibly also have harmful effects on the environment and humans.
Additional relevant publications:
Use of nanoscale iron for the remediation of groundwater damages
Use of nanomaterials in coatings
Use of nanomaterials in textiles
Nanotechnology-based lighting systems: organic light-emitting diode (OLED)
Source: German Environment Agency

Read more: Use of nanomaterials and nanoscale products for wastewater treatment

Grupul NanoSafety publică a doua ediție a ghidului pentru a sprijini munca în condiții de siguranță cu nanomaterialele

Este aplicabil unei game largi de nanomateriale, Inclusiv particule, fibre, pulberi, tuburi și fire precum și agregate și aglomeratului, și recunoaște incertitudinea anterioare și actuale în dezvoltarea de gestionare eficientă a riscurilor În cazul în care se ocupă cu nanomaterialele și pledează pentru o strategie de precauție pentru a minimiza potențialul expunere.

Posted: May 30, 2016

NanoSafety Group publishes 2nd Edition of guidance to support safe working with nanomaterials

(Nanowerk News) The UK Nanosafety Group (UKNSG) has updated and published a 2nd edition of guidance (pdf) to support safe and responsible working practices with nanomaterials in research and development laboratories.

Working Safely with Nanomaterials in Research and Development
The document aims to provide guidance on factors relating to establishing a safe workplace and good safety practice when working with particulate nanomaterials.It is applicable to a wide range of nanomaterials, including particles, fibres, powders, tubes and wires as well as aggregates and agglomerates, and recognises previous and current uncertainty in developing effective risk management when dealing with nanomaterials and advocates a precautionary strategy to minimise potential exposure.

The 2nd edition of the guidance provides updates to account for changes in legislation, recent studies in the literature, and best practice since 2012.

In particular, specific sections have been revised to account for the full implementation of Global Harmonised System (GHS) which came into force on 1 June 2015 through the CLP regulations. The document explains the approaches that are presently being used to select effective control measures for the management of nanomaterials, more specifically control banding tools presently in use. Significant changes can be found in the following sections: ‘Hazard Banding’, ‘Exposure Control’, ‘Toxicology’, and ‘Monitoring’.

Of relevance to employers, managers, health and safety advisors, and users of particulate nanomaterials in research and development, the guidance should be read in conjunction with the Approved Code of Practice on COSHH, together with the other literature referred to in the document.
The document has been produced taking account of the safety information currently available and is presented in the format of guidance and recommendations to support implementation of suitable protocols and control measures by employers and employees. It is intended that the document will be reviewed and updated on a periodic basis to keep abreast of the evolving nature of the content.
Source: UK Nanosafety Group

Read more: NanoSafety Group publishes 2nd Edition of guidance to support safe working with nanomaterials

Sisteme de viteze tactice avansate cu acționare directă Spitfire Modulară Armă tactilă Plate Carrier echipată cu acțiune directă Hurricane Rug / Rifle Mag (Magazine) Carrier / Pouch Panel în Hyde Definiție Pencott-GreenZone Foliage Green Combat Camo (camuflaj) Pattern(Direct Action Advanced Tactical Gear Systems Spitfire Modular Tactical Armor Plate Carrier Outfitted with Direct Action Hurricane Chest Rig/Rifle Mag(Magazine) Carrier/Pouch Panel in Hyde Definition PenCott-GreenZone Foliage Green Combat Camo(Camouflage) Pattern)

Abordarea sistemelor Direct Action pentru combaterea / designul tactic al angrenajelor este evidentă în mod special în transportatorul de plăci modulare DA Spitfire, care poate fi configurat în numeroase moduri, în funcție de preferința operatorului

Direct

Acțiune directă Advanced Tactical Gear Systems Combate Imbracaminte / Battle Uniforma (BDU) Prototypes: Prototype Combat tricou și pantaloni(Direct Action Advanced Tactical Gear Systems Combat Clothing/Battle Dress Uniform(BDU) Prototypes:Prototype Combat Shirt and Pants )

Combat tricou și pantaloni;Totul este conceput să facă parte dintr-un SISTEM, pentru a optimiza performanța atacatorului / operatorului

Direct Action

Cercetătorii au controlat eliberarea de proteine ​​din nanoparticule fără încapsulare

De zeci de ani, inginerii biomedicale au fost încapsularea cu migală de proteine în nanoparticule pentru a controla eliberarea lor. Acum, o echipa de cercetare condusa de profesorul universitar Molly Shoichet a demonstrat a proteinelor poate fi lansat peste cateva saptamani, chiar luni, fără a mai fi încapsulate. În acest caz, echipa de analizat în mod special proteine terapeutice relevante pentru regenerarea tesutului dupa accident vascular cerebral și leziuni ale măduvei spinării.

Researchers control protein release from nanoparticles without encapsulation

(Nanowerk News) A University of Toronto Engineering team has designed a simpler way to keep therapeutic proteins where they are needed for long periods of time. The discovery is a potential game-changer for the treatment of chronic illnesses or injuries that often require multiple injections or daily pills.

For decades, biomedical engineers have been painstakingly encapsulating proteins in nanoparticles to control their release. Now, a research team led by University Professor Molly Shoichet has shown that proteins can be released over several weeks, even months, without ever being encapsulated. In this case the team looked specifically at therapeutic proteins relevant to tissue regeneration after stroke and spinal cord injury.
„It was such a surprising and unexpected discovery,” said co-lead author Dr. Irja Elliott Donaghue, who first found that the therapeutic protein NT3, a factor that promotes the growth of nerve cells, was slowly released when just mixed into a Jello-like substance that also contained nanoparticles. „Our first thought was, ‘What could be happening to cause this?'”
Left to right: Irja Elliott Donaghue, Malgosia Pakulska and Jaclyn Obermeyer
Left to right: Irja Elliott Donaghue, Malgosia Pakulska and Jaclyn Obermeyer, under the direction of Professor Molly Shoichet in U of T Engineering, discovered that proteins can be released slowly without first encapsulating them in nanoparticles.
Proteins hold enormous promise to treat chronic conditions and irreversible injuries – for example, human growth hormone is encapsulated in these tiny polymeric particles, and used to treat children with stunted growth. In order to avoid repeated injections or daily pills, researchers use complicated strategies both to deliver proteins to their site of action, and to ensure they’re released over a long enough period of time to have a beneficial effect.
This has long been a major challenge for protein-based therapies, especially because proteins are large and often fragile molecules. Until now, investigators have been treating proteins the same way as small drug molecules and encapsulating them in polymeric nanoparticles, often made of a material called poly(lactic-co-glycolic acid) or PLGA.
As the nanoparticles break down, the drug molecules escape. The same process is true for proteins; however, the encapsulating process itself often damages or denatures some of the encapsulated proteins, rendering them useless for treatment. Skipping encapsulation altogether means fewer denatured proteins, making for more consistent protein therapeutics that are easier to make and store.
„This is really exciting from a translational perspective,” said Jaclyn Obermeyer. „Having a simpler, more reliable fabrication process leaves less room for complications with scale-up for clinical use.”
The three lead authors, Elliott Donoghue, Obermeyer and Dr. Malgosia Pakulska have shown that to get the desired controlled release, proteins only need to be alongside the PLGA nanoparticles, not inside them. Their work was published today in the journal Science Advances („Encapsulation-free controlled release: Electrostatic adsorption eliminates the need for protein encapsulation in PLGA nanoparticles”).
„We think that this could speed up the path for protein-based drugs to get to the clinic,” said Elliott Donaghue.
The mechanism for this encapsulation-free controlled release is surprisingly elegant. Shoichet’s group mixes the proteins and nanoparticles in a Jello-like substance called a hydrogel, which keeps them localized when injected at the site of injury. The positively charged proteins and negatively charged nanoparticles naturally stick together. As the nanoparticles break down they make the solution more acidic, weakening the attraction and letting the proteins break free.
„We are particularly excited to show long-term, controlled protein release by simply controlling the electrostatic interactions between proteins and polymeric nanobeads,” said Shoichet. „By manipulating the pH of the solution, the size and number of nanoparticles, we can control release of bioactive proteins. This has already changed and simplified the protein release strategies that we are pursuing in pre-clinical models of disease in the brain and spinal cord.”
„We’ve learned how to control this simple phenomena,” Pakulska said. „Our next question is whether we can do the opposite–design a similar release system for positively charged nanoparticles and negatively charged proteins.”
Source: University of Toronto

Read more: Researchers control protein release from nanoparticles without encapsulation

Fizica spinului cu ioni prinsi

Ideea propusă de echipa de cercetători arată modul de abordare a problemelor numărului partiționarea prin aplicarea unei strategii cunoscut sub numele de „recoacere cuantică“. Acest lucru se face prin aplicarea unui câmp magnetic puternic INITIALLY Toate care este apoi oprit lent în timpul simulării. În acest fel, starea cuantică este deformată până când se potrivește cu soluția dorită. Acest lucru poate fi mai rapid decât alte metode pentru a rezolva pe problemă.

Posted: May 27, 2016

Spin glass physics with trapped ions

(Nanowerk News) One of the most striking discoveries of quantum information theory is the existence of problems that can be solved in a more efficient way with quantum resources than with any known classical algorithm.

Number-partitioning, which refers to the simple task of dividing a set of numbers into two groups of equal sums is, in fact, a very difficult problem to solve with classical computers.
Often, such problems can be related to a physical model, which then allows for solving the problem by finding the minimum energy state of the model. Here, an important role is played by spin glass models, that is, models describing a collection of tiny magnets interacting with each other in a random fashion.
Solving Number Partitioning with Spin Glass Models
Solving Number partitioning with spin glass models. (Image: ICFO)
In the recent work published in Nature Communications („Quantum annealing for the number-partitioning problem using a tunable spin glass of ions”), Dr. Tobias Grass, David Raventós, Dr. Christian Gogolin, led by ICREA Prof. at ICFO Dr. Maciej Lewenstein, in collaboration with Dr. Bruno Julià-Díaz from the University of Barcelona (UB), lay the theoretical foundations for a quantum simulation of spin glass physics with trapped ions.
The idea proposed by the team of researchers shows how to tackle the problem of number partitioning by applying a strategy known as „quantum annealing”. This is done by initially applying a strong magnetic field which is then switched off slowly during the simulation. In this way, the quantum state is deformed until it matches with the desired solution. This can be faster than other methods to solve the problem.
The implementation of this approach is possible with state-of-the-art techniques for trapping, cooling, and manipulating ions. As Dr. Grass clearly states, „In the past, we have seen quantum simulations which solve a problem from quantum physics. In our approach, the same techniques are used to solve a problem from computer science. The results of our study opens a new path and brings us a step closer to the development of a quantum computer.”
Source: ICFO-The Institute of Photonic Sciences

Read more: Spin glass physics with trapped ions

Computerul unei mașini poate „amprenta” în minute în funcție de modul în care conduceți(A Car’s Computer Can ‘Fingerprint’ You in Minutes Based on How You Drive )

Și într-o epocă în care automobilele au devenit recolte de date, computerele mobile pe mai multe tonuri, datele colectate de mașina dvs. – sau una pe care o închiriați sau o împrumutați – vă pot identifica probabil pe baza acelui stil de conducere după doar câteva minute în spatele roată

ACar's

Inginerii Carnegie Mellon dezvoltă senzori de prevenire a caderilor(Carnegie Mellon engineers develop fall-prevention sensors)

sunt foarte îngrijorați de căderea părinților vârstnici – și că această îngrijorare duce la acțiune.dezvoltă în prezent acești senzori activi de prevenire a căderilor, atât pentru instalațiile de îngrijire de vârstă cât și pentru locuințele private, care pot determina atât cei aflați în pericol, cât și locurile unde sunt

Carnegie