arată că foarmele metalice compozite ușoare sunt eficiente în blocarea razelor X, a razelor gamma și a radiațiilor neutronice și sunt capabile să absoarbă energia coliziunilor cu impact mare
Fiind un vehicul cu atac rapid de tip dune-buggy / Baja-racing, vehiculul cu atac rapid RPAMS Strike-M4 este echipat cu un sistem de suspensie de înaltă performanță, cu aburi speciali de șoc și anvelope de rulare . Spatele scaunelor este chiar încastrat, astfel încât operatorii din interior își pot păstra pachetele de luptă (rucsaci) în timpul călătoriei în vehicul. Modelul Strike-M4 vine chiar cu o mitralieră montată pe partea pasagerului din față, cea din fotografiile de sport are o schemă de vopsea de camuflaj Kryptek arid / desert.
RP Advanced Mobile Systems RPAMS Can-Am Strike-M/M4 Maverick Fast-Attack Vehicle (FAV) in Kryptek Camouflage Hits Almost 80 MPH Off-Road for Military Special Operations Forces (SOF) Missions! (Video!)
Being an all-terrain/off-road dune-buggy/Baja-racing-type fast-attack vehicle, the RPAMS Strike-M4 fast-attack vehicle is outfitted with a high-performance suspension system with special shock aborbers and run-flat tires. The seat backs are even recessed so the operators inside can keep their combat packs (backpacks) on while they’re riding in the vehicle. The Strike-M4 even comes with a swing-arm machine gun mount on the front passenger side, the one in the photos sports a Kryptek arid/desert combat camouflage paint scheme.
The following information comes directly from the RP Advanced Mobile Vehicles website:
STRIKE-M/M4 STANDARD COTS FEATURES:
– RP Fine Textured Coating
– Multi-Modal Payload Flatbed
– Multi-Modal Tailgate and Track System
– Tactical Assault Push Bumper
– Upgraded Suspension
– Forward/Aft 2” Receiver
– Steel Wheels
– RP SOF Series II 12-PLY Run-Flat Tires
– RP Fatigue Mitigation Tactical Seats
– RP MOLLE Soft Top Roof Panel
– RP Strike-M4: RP Fatigue Mitigation Tactical Rear Folding Seats
RECOMMENDED OPTIONS:
– Team Standoff Nerf Bars
– RP Modular Ammo/Fuel Can/Payload Assembly
– MSI Defense Series Shocks:
– 2.5” Piggyback passive shaft adjustable compression shocks
– 2.5” JTRAC semi-active shock system w/terrain selection shock tuning control
Compartimentul passeger oferă locuri multiple în cabină, pentru a fi alăturate (carabinele M4A1, de exemplu), inclusiv pe carcasă, iar platforma din spate poate purta un operator rănit pe o targă și un scaun pentru medic, în cazul este necesară o medevac (evacuare medicală)
Un pirolizer poate include un cuptor rotativ configurat pentru a piroliza materia primă primită în acesta. Piroliza poate include de asemenea un vas de încălzire care înconjoară cuptorul rotativ și care definește o cameră de încălzire pentru gaze fierbinți. Piroliza poate include în plus un agitator dispus în camera de încălzire. Agitatorul poate fi configurat pentru a agita gazele fierbinți. Agitatorul poate fi rotit cu cuptorul rotativ.
Acest material îndepărtează energia de impact din proiectil prin deformarea sa plastică. Limitările armăturilor de oțel sunt densitatea lor ridicată, deformarea maximă și protecția scăzută împotriva glonțului care străpunge armura.
În primul rând, țesătura flexibilă este texturată cu un profil încrețit, astfel încât chiar și atunci când este așezată plat, are o anumită adâncime sau un aspect pe mai multe niveluri. În al doilea rând, materialul poate fi format în forme complexe și poate păstra aceste forme, pentru a imita toate tipurile de teren natural sau artificial. Orice model de camuflaj de luptă curent sau model de mediu natural preluat din fotografii poate fi aplicat materialului de bază 3D texturat, care, în înțelegerea DR, este fabricat în foi care pot forma aproape orice formă. Puteți observa din fotografiile însoțitoare că camuflajul VCS 3D poate fi aproape perfect asemănător / imitării mediului de luptă natural sau urban, indiferent dacă acesta este frunziș, roci / bolovani, zid de cărămidă etc. Compania se referă la scopul tehnologiei ca „multi – ascundere spectaculoasă „și” semnătura criptică și ascunderea criptică a câmpului de luptă … „și este minunat nedrept.
VATEC Concealment Solutions (VCS) Flexible Multispectral 3D Combat Camouflage System: Texturized Individual and Vehicle Camouflage by Polaris Solutions (Israel) and ReadyOne Industries Conceals Your Visible-Light and Thermal/IR (Infrared) Signatures from the Enemy!
Speaking of IR (InfraRed) light tech at NDIA SOFIC 2015 (Special Operations Forces Industry Conference 2015), DefenseReview (DR) ran across some very interesting flexible 3D camouflage that’s multispectral, so it also works in the thermal/IR and near-IR/night-vision light spectrums, not just the visible light spectrum. Developed by Polaris Solutions in Israel and now manufactured and marketed by ReadyOne Industries under the VATEC Concealment Solutions (VCS) brand, the new 3-dimensional (or “tri-dimensional”) texturized flexible multi-spectral combat camouflage fabric material is actually three-dimensional in two aspects.
First, the flexible fabric itself is textured with a crinkly profile, so even when it’s laying flat, it’s got some depth, or multi-level aspect, to it. Second, the material can be formed into complex shapes, and keep those shapes, to mimic all types of natural or man-made terrain. Any current combat camouflage pattern or natural environment pattern taken from photographs can be applied to the core 3D-textured material, which, to DR’s understanding, is manufactured in sheets that can form just about any shape. You can see from the accompanying photographs that the VCS 3D camouflage can virtually perfectly match/mimic the natural or urban combat environment, whether it be foliage, rocks/boulders, a brick wall, etc. The company refers to the technology’s purpose as “multi-spectral concealment” and “portable battlefield cryptic signature and concealment”…and it’s wonderfully devious.
Anyway, it’s really cool, and DR finds it interesting that the Israelis came up with it, instead of us (United States). Then again, unlike us, Irael’s surrounded on all side by much larger enemy or frenemy states/countries, so they’ve got a much larger daily survival requirement to think about than we do. However, the good news is, it’s now being manufactured and marketed right here in the USA, so it’s Berry Compliant.
The ReadyOne Industries under the Polaris/VATEC 3D-textured multispectral camouflage fabric material can be integrated into uniforms and ghillie suits, sniper hides, vehicle camouflage, structural camouflage, you name it. Speaking of sniper hides, VATEC/ReadyOne’s Bill Fore told Defense Review that you can set up a sniper hide with it in about 25 minutes, which is pretty quick. Check out the video DR shot below to see just some of the things you can do with the VATEC combat camo.
Bill Fore
Director of Sales and Business Development
VATEC Concealment Solutions (VCS)
ReadyOne Industries
11460 Pellicano
El Paso, TX 79936
Phone: 915-858-7277 Ext. 1111
Email: [email protected]
Website 1: http://www.readyone.org
Website 2: http://www.vatec-us.com